
PRODUCT DATASHEET
4635 Boston Lane
Phone: 512-382-8100
MKTG-DOC-00116
A01
Austin, TX 78735
www.nuventix.com
Revision
Oct 2011
Mechanical
SynJet Cooling Solution
SynJet Wire Harness
Connector Pinout
Part Numbers
Part Number
Description
Notes
SSCCS-IM005-002
SynJet, XFlow 30, High Performance, 5V, PWM, Black
Use PWM input to control performance setting
SSCCS-IM012-001
SynJet, XFlow 30, High Performance, 12V, PWM, Black
Use PWM input to control performance setting
HSCCS-CALBL-001
Heat Sink, Chip Cooler 30, Al, Black
Contact sales for other options
WALLS-C4150-001
Wire Harness, 4-Wire, 150 mm Length
Contact sales for other lengths
WALLS-C4600-001
Wire Harness, 4-Wire, 600 mm Length
Contact sales for other lengths
Pin
Wire Color
Symbol
Description
1
Red
+VDC
5 V or 12 V depending on model
2
Black
GND
Ground
3
Purple
CTRL2
Status signal for PWM model
4
Blue
CTRL1
PWM input for PWM model
Nuventix reserves the right to make changes to the products or information contained herein without notice. No
liability is assumed as a result of their use or applications. For additional information, please contact Nuventix directly.
All dimensions are nominal and in mm unless otherwise stated. See product drawings for more detail.
IMPORTANT: SynJets should be completely wired to the power supply before the power supply is energized. The power supply should be
turned off before the SynJet Cooler is disconnected. SynJet Coolers are not designed for “hot swap” or “hot plug” applications.